Stream quality in a small urbanised catchment

River-length patterns in the chemistry and biology of the Charlton Brook, an unclassified watercourse in Sheffield, England, have been examined. Five sampling sites for macroinvertebrates and pollutant analysis were used, in conjunction with Environment Agency's General Quality Assessment (GQA) methodologies and hydraulic analysis of the catchment. Sites were strategically located to account for the tributaries and the brook downstream of their confluence, to assess the potential impact from surface water outfalls (SWOs). Variations in GQA parameters indicate a significant drop in quality downstream of the SWOs that discharge to the study watercourse, with a marked drop in biological diversity noted at the onset of urbanisation. The decline in biological quality however is greater than that suggested by physicochemical analysis alone. There was a significant inverse relationship between impermeable area and biological diversity. Analysis of polycyclic aromatic hydrocarbons (PAHs) and trace metals in sediment from the watercourse showed significant yet irregular variations between sites. The potential toxicity of instream metal concentrations was determined using cumulative criterion unit (CCU) scores, which highlighted cadmium, copper and lead as the major sources of potential chronic instream toxicity. The threshold for likely harm to aquatic life is exceeded at all sites. In the absence of different physical characteristics, comparisons of the chemical and biological data indicate that the benthic macroinvertebrate population of such watercourses are adversely affected by the stormwater inputs.     

Effects of bioaugmentation on indigenous PCB dechlorinating activity in sediment microcosms

Bioaugmentation is an attractive mechanism for reducing recalcitrant pollutants in sediments, especially if this technology could be applied in situ. To examine the potential effectiveness of a bioaugmentation strategy for PCB contamination, PCB dehalorespiring populations were inoculated into Baltimore Harbor sediment microcosms. A culture containing the two most predominant indigenous PCB dehalorespiring microorganisms and a culture containing a strain with a rare ortho dechlorination activity and a non-indigenous strain that attacks double-flanked chlorines, were inoculated into sediment microcosms amended with 2,2′,3,5,5′,6-hexachlorobiphenyl (PCB 151) and Aroclor 1260. Although we observed a similar reduction in the concentration of PCB 151 in all microcosms at day 300, a reduced lag time for dechlorination activity was observed only in the bioaugmented microcosms and the pattern of dechlorination was altered depending on the initial combination of microorganisms added. Dechlorination of Aroclor 1260 was most extensive when dehalorespiring microorganisms were added to sediment. Overall numbers of dehalorespiring microorganisms in both bioaugmented and non-bioaugmented microcosms increased 100- and 1000-fold with PCB 151 and Aroclor 1260, respectively, and they were sustained for the full 300 days of the experiments. The ability of bioaugmentation to redirect dechlorination reactions in the sediment microcosms indicates that the inoculated PCB dehalorespiring microorganisms effectively competed with the indigenous microbial populations and cooperatively enhanced or altered the specific pathways of PCB dechlorination. These observations indicate that bioaugmentation with PCB dehalorespiring microorganisms is a potentially tractable approach for in situ treatment of PCB impacted sites.     

Integrated understanding of urban land, groundwater, baseflow and surface-water quality--the City of Birmingham, UK

Integrated understanding of urban land, groundwater (shallow and deep), baseflow and surface-water quality relationships is required for effective urban water-quality management. Chemical quality data from across these media have been collected for the Birmingham (UK) aquifer--River Tame conurbation to assess chemical transport from contaminated land to groundwater to baseflow to surface water. Although metals concentrations were high in soils, low leachability and attenuation caused concentrations in groundwaters and baseflow discharging to surface water to be generally low with only sporadic elevated concentrations attributed to localised point sources. Hydrocarbon VOCs (volatile organic compounds) were similarly absent or at low concentration attributable to their ready natural attenuation. Chlorinated VOCs, however, were widely encountered in groundwater, discharging as baseflow to surface water and impacting surface-water quality. This is attributed to their DNAPL (dense nonaqueous-phase liquid) properties and relative recalcitrance although there was some evidence of biodegradation, albeit insufficient to protect surface water and groundwater abstraction receptors. Some inorganic trends were evident across the various media; nitrate was the most significant quality concern. Generic conclusions are drawn on urban water-quality management and the need for risk-based management strategies to optimise use of urban, sporadically contaminated groundwater in conjunction with surface water highlighted.     

Regional science: back to the future?

After initiating a provocative discussion on “regional science in crisis” (Bailly and Coffey 1994; Gibson 1994; Plane 1994; Stough 1994; Anas 1994; Vickerman 1994; Casetti 1995), we now wish to present some additional thoughts on how regional scientists can simultaneously make their field more relevant scientifically and more useful for society. At a time when resources are tight, when the number of regional science students is small, when administrators are scrutinizing our budgets and our ability to generate outside money, we need to do something to regain (or is it simply to gain?) our place in the sun. In this paper, we argue that regional scientists will not reestablish their field by using classical approaches to regional analysis alone. It is essential that we look at new ways to answer questions raised by our social, economic, and political institutions. More specifically, we make some observations concerning the history of regional science, its role within universities, and its nature, as well as offering some suggestions concerning how regional scientists can attempt to improve the situation.     

木结构建筑

本文介绍了木材作为永恒的建筑材料，其所具有的许多独特的性能和在建筑上的许多特殊的用处。并且还就木结构在多种建造形式中的特点和做法进行了简要的阐述，包括：轻质木框架房屋，多层木框架房屋、原木房屋、木框架房屋、柱结构房屋、木桥及特殊结构等。     

Effects of water parameters on the degradation of microcystin-LR under visible light-activated TiO2 photocatalyst

A study was performed to determine the effect of pH, alkalinity, natural organic matter (NOM) and dissolved oxygen in the performance of nitrogen and fluorine doped TiO₂ (NF-TiO₂) for the degradation of hepatotoxin microcystin-LR (MC-LR) in synthetic and natural water under visible light irradiation. The initial degradation rate of MC-LR was fastest under acidic conditions (3.50 ± 0.02 × 10⁻³ μM min⁻¹ at pH 3.0) and decreased to 2.29 ± 0.07 × 10⁻³ and 0.54 ± 0.02 × 10⁻³ μM min⁻¹ at pH 5.7 and 7.1, respectively. Attractive forces between the opposite charged MC-LR and NF-TiO₂ are likely responsible for the enhancement in the photocatalytic decomposition of MC-LR resulting from increased interfacial adsorption. For carbonate buffered solutions, the photocatalytic activity of NF-TiO₂ was reduced when increasing the carbonate concentration up to 150 mg CaCO₃ L⁻¹. The scavenging of radical species by the bicarbonate ion at pH 7.1 is discussed. In the presence of NOM, the degradation rates decreased as pH and initial concentration of the NOM increased. The inhibition was higher with fulvic acid than humic acid under alkaline conditions. Oxygenated solution yields higher NF-TiO₂ photocatalytic degradation of MC-LR compared to nitrogen sparged solution at pH 5.7. The involvement of specific reactive oxygen species implicated in the photodegradation is proposed. Finally, no significant degradation is observed with various natural waters spiked with MC-LR under visible light (λ > 420 nm) but high removal was achieved with simulated solar light. This study provides a better understanding of the interactions and photocatalytic processes initiated by NF-TiO₂ under visible and solar light. The results indicate solar photocatalytic oxidation is a promising technology for the treatment of water contaminated with cyanotoxins.     

Atmospheric pollution for trace elements in the remote high-altitude atmosphere in central Asia as recorded in snow from Mt. Qomolangma (Everest) of the Himalayas

A series of 42 snow samples covering over a one-year period from the fall of 2004 to the summer of 2005 were collected from a 2.1-m snow pit at a high-altitude site on the northeastern slope of Mt. Everest. These samples were analyzed for Al, V, Cr, Mn, Co, Ni, Cu, Zn, As, Rb, Sr, Cd, Sb, Pb, and Bi in order to characterize the relative contributions from anthropogenic and natural sources to the fallout of these elements in central Himalayas. Our data were also considered in the context of monsoon versus non-monsoon seasons. The mean concentrations of the majority of the elements were determined to be at the pg g(-1) level with a strong variation in concentration with snow depth. While the mean concentrations of most of the elements were significantly higher during the non-monsoon season than during the monsoon season, considerable variability in the trace element inputs to the snow was observed during both periods. Cu, Zn, As, Cd, Sb, and Bi displayed high crustal enrichment factors (EF(c)) in most samples, while Cr, Ni, Rb, and Pb show high EF(c) values in some of the samples. Our data indicate that anthropogenic inputs are potentially important for these elements in the remote high-altitude atmosphere in the central Himalayas. The relationship between the EF(c) of each element and the Al concentration indicates that a dominant input of anthropogenic trace elements occurs during both the monsoon and non-monsoon seasons, when crustal contribution is relatively minor. Finally, a comparison of the trace element fallout fluxes calculated in our samples with those recently obtained at Mont Blanc, Greenland, and Antarctica provides direct evidence for a geographical gradient of the atmospheric pollution with trace elements on a global scale.     

Separation of He/N2/CH4 ternary mixtures by a triple-reflux pressure swing adsorption process

Conventional pressure swing adsorption (PSA) processes can only produce one high purity product in a single stage, whereas the state-of-art dual-reflux PSA (DR-PSA) can produce two high purity products simultaneously. However, multicomponent gas separation is often required in the industry, targeting at recovering several valued products at the same time. In this study, we propose a novel adsorption process, namely triple-reflux PSA (TR-PSA), to separate three components simultaneously. A middle product outlet and a middle reflux stream were introduced to the adsorption columns of a conventional DR-PSA process to separate ternary mixtures of nitrogen, methane, and helium. Nonisothermal dynamic models were built to investigate the impacts of operating parameters particularly the location of the middle reflux/product stream and the middle reflux flow rates. Results showed that the TR-PSA process successfully separated ternary mixtures obtaining three enriched products simultaneously in a single stage, yielding a separation performance comparable to that of the double-stage DR-PSA with significantly lower capital and energy cost.     

Multicriteria optimization as enabler for Sustainable Ceramic Matrix Composites

Over the past 40 years, development of Ceramic Matrix Composites (CMCs) has focused mainly on the improvement of material performance and optimization of cost-efficient production routes. Recently, more fields of application have opened up for CMCs, in which environmental impacts are relevant. These impacts have barely been investigated so far but receive growing interest due to increasing awareness of the environmental consequences. Our innovative approach frames material properties in relation to environmental impacts (e.g., global warming potential in CO₂ emission) by varying process parameters to balance optimum performance against environmental considerations. First, the process of wet filament winding has been investigated up to the Carbon Fiber Reinforced Plastic (CFRP) state by changing both the curing and tempering temperatures. During the production of CFRP plates, mass and energy flows were tracked in each step. Three point-bending and interlaminar shear tests have been performed on the resulting samples to identify basic mechanical properties. The environmental impacts are determined by a cradle-to-gate Life Cycle Assessment (LCA), using the software SimaPro. The resulting tradeoffs between mechanical properties and environmental impacts show nonlinear behavior, thus revealing optimum points above which improved mechanical properties are associated with significantly higher CO₂ emissions.